The large male/female end of the Pixie cracked again after one season. Last time I had to buy an entire new one. Anyone make the custom looking part?

I got 2 zones of 2 Rainbird 5004plus Rotors irrigating the same 90m2 as water flow was not enough to have the 4 rotor heads working at the same time. As mi experience the automatic programs do not successfully work, I would like to try a more controlled approach in specifying the flow rate in the Smart program. But, what value do I have to put there for each of the 2 zones? I saw on rain birds webpage, the 5004 nozzle 1.5 and 4psi, have a flow rate of 7-8mm/h…but the app does not let me select below the 10mm unfortunately. Can you pleas say what number I have to fill-out for those 2 5004 rotor heads?

I had to cancel watering because it’s 25F this morning. It’s because the weather is misinterpreted. The forecast today is 58/34, but that means it will be 34 for tonight’s low. Last night’s low was 25 and the Netro should look at that number for watering this morning. 

NetroWeather not updating, other weather apps only update if they are resubmitted every couple of days, is it possible to add other weather providers to the app?

I have 2 Pixies and both are on smart schedule. However, one has been acting up and showing a yellow triangle without any explanation for every other run.

Example:

Pixie 1 - Nov 24 - Good run

Pixie 2 - Nov 24 - Good run

Pixie 1 - Nov 26 - BAD run - yellow triangle

Pixie 2 - Nov 26 - Good run

Pixie 1 - Nov 28 - Good run

Pixie 2 - Nov 28 - Good run

Pixie 1 - Nov 30 - BAD run - yellow triangle

Pixie 2 - Nov 30 - Good run

Why would this happen????  I have cameras and PIXIE 1 DID NOT RUN on 26th and 28th.

Thanks.

Hi. I have attached pictures of my screen that show that the app is repeating waterings on the same day,etc.  This doesn’t seem correct (they are drip irrigation zones)?

Did I set it up incorrectly?

Thanks 

Are there any issues with the Netro forecast function. I'm on the Beta version 3.0.0 and mine is not showing the forecast. The last data that was present was yesterday(Nov 6). 

I have a spark controller and. I have a program setup for seeding that is 5 minutes per zone.  I want to run that program 3 times per day at 4am, 12pm, and 6pm. Anyway to easily accomplish this without having to setup 3 different programs?  

Hi Community!

I've got 4 zones linked to same program all with Smart Watering activated. I noticed that on the schedule proposed there's one zone that's watered several times per day while others not. Settings are the same for all zones so I dunno what's wrong. Is there a way to set the Smart Watering of that zone like the others?

Thanks a lot in advance for your help!

I have 2 pixie hose faucet timers on 2 zones with 2 whisperers.

On one zone the whisperer is associated with the pixie on the other zone it is listed separately .

How do I associate the second whisperer  with the second pixie zone?

I have tried going into the second pixie settings , sensor , edit but nothing is listed.

Thank you

I would like to know how to manage the following garden.
I currently have 5 areas of lawn and other plants, with 3 Hunter PGP sprinklers for each area. Of these 5 zones, there are two with a lot of shade, and the rest are sunny (central Spain).
On the other hand, I have another zone with 6 diffusers, and a last one with a drip system for the Leylandy hedge.
I am interested in acquiring a Spark programmer but... how many Whisperer would I need?

How does Spark differentiate between the different zones and how does it combine the amount of humidity needed? The type of grass I have is made up of Raygrass, Fescue, Poa, and Agrostis. I could send you a plan of my system for your advice.

the outer lines indicate the individual irrigation fields.
AREAS A1 - A2 -A3 - A4 -B1 and B4 are the shadiest areas.
These areas are shadier due to the height of the hedge.

For orientation, a straight line between points 13 and 8 marks the North-South line, where 13 is South and 8 is North.
Neither the diffuser area nor the drip line of the hedge is represented here.
The water inlet is located in the legend E1, between sprinklers 12 and 13.

Thank you very much.

Hi Netro Community, I just bought a house with a huge yard and the Netro system. Spent a lot of time identifying zones and getting the watering right by nozzle type, square footage, etc. Some areas still seem too dry and others’ too wet. So…

How can I be sure I have selected the right soil type? 

How can I verify I have the right grade of slope selected by zone? 

Other ways I can help Netro identify dry spots? 

Hi,

I’m not sure that I can trust this Spark Controller anymore.  Woke up to notifications of zones being watered when controller is programmed to water on MWF.  Moisture levels in all zones was okay on all zones and smart level is only set to basic.  According to the notifications the controller was watering on 9/8/21 instead of 9/7/21.  It’s like the calendar on Netro’s server is set to the wrong date.  Very disappointing, and I don’t know if I can trust the controller going forward. the controlle

I’ve got mine watering during a rainstorm a couple times or when the weather is predicting rainfall. Any way to adjust whatever number it’s using to decide not to water?

Hi

I have checked that the irrigation modes

DEEP

EPA

REGULAR

FREQUENT

Irrigate the same amount of water, the only difference is the frequency in days and time per irrigation.

The only mode that saves water is ECO 

Or does a DEEP / EPA modes, will help me to save water compared to REGULAR or FREQUENT during a period of time ( I also have installed the whisperer) . Is the whisperer able to detect deep water?

I would like to stress the grass up to a point irrigation is needed, so swapping between DEEP and ECO to save water. But I cannot create a calendar where I could set up the watering mode per month for instance.

Any advice?

How do I know what the goal % moisture is according to my plant (Agave). The app essentially tells me to water daily which seems a lot.

What is the lower moisture level recommended to start an irrigation ?

I'm using the beta app. I changed my weather provider from Dark Sky to AccuWeather and now I'm trying to change it back, but am getting the attached error. Any ideas on how I can go back to Dark Sky? 

How do I incorporate a rain sensor (or other device) and make it override expected rainfall?

I am supposed to be in a rainy period but have missed the heavy stuff completely so that my pixie just remains off after reading the forecasts.

What’s the best way of correcting for actual rainfall?

I had a malfunction in one of my valves and one zone watered all night, without metro knowing. That zone is well watered but metro thinks it needs watered. If I turn it off the program it just makes matters worse. How do I get the hydration level back up in one zone without turning off water to my sprinkler system? I still need to water other zones. I need to adjust the hydration level of one zone. Let me know. Thanks