My system is connected to a 500 liter tank. If I turn on both zones, it empties in 13 minutes.

In the application there is no possibility to program the maximum irrigation time for each individual area. I want you to work at most 13 minutes!

Can I use the Netro Spark 16 if I use the Rainbird ESP Me? I have 15 active zones.

Someone can help me?I need change the day for one program exists...what is the procedure? Thak you

Good morning, I installed a Sprite 6 controller, it works perfectly, but I have three questions: 1. How do I change the irrigation percentage without changing the watering minutes for all the zones each time? 2. When rain or wind is forecast, does the irrigation program still skip even if the smart function is not enabled? 3. When I start a zone in manual mode, for example to control the sprinklers, is it normal for there to be a long delay between pressing the Stop button and the actual interruption? Thanks.

How do I change the wifi network my Netro controller is connected too? I cannot proceed beyond step 2 from the instructions on the app. I get the message "Please connect to Wi-fi network "Netro_IRC_xxx."  However, the app shows that I am already connected!!

Hi, I just bought the whisperer 2 and would like to have it as only sensor for the entire garden, however is allowed to have maximum 3 zones for sensor. Is there a way to link all the zones to it? I have 7 zones.

Thanks

Way Netro had changed my user password?

I'm curious if there is a way to restrict or cap the calculated volume of water used daily for smart watering schedules. For example, my well produces about 3500 gallons a day or close to 4.5 CCF. I have a storage tank where the water is stored. Is there any logic that can be added to the smart watering calculation or scheduling to account for a daily water volume budget? 

I'm experiencing a serious issue with my Netro Spark 16 controller. It connects correctly to Wi-Fi and appears online in the app, but when I try to start irrigation manually, the app just stays on "in communication" and nothing happens.

The problemm is with the 4g Vodafone/HoMobile provider as yout mentioned in https://netrohome.com/en/forum/posts/4052

I have already asked several time the update for the device, but nobody reply me

i wrote also to Netro support email: support@netrohome.com  --> nobody reply me.

What should i do to have this update?

Please

Hi, it’s the end of our watering season where I live, the city just shut off the water for the year. Any guidance on what to do in the app to have the system off for until spring?  

Hi, dopo aver collegato tutto, ho provato a fare un test manuale ma non parte l irrigazione.

Sapete aiutarmi?

Grazie

The app crashea when I click on a zone on Google pixel 8a. I had to configure them with another phone. Already tried to reinstall the app and clear cache

Not really a question but a shout-out about the changes to the app.  l found the wonderful new additions that the Netro team just made.  I suggest everyone check out the new additions.  I have tweked a couple of my zones and Very pleased.  Suggest everyone check it out!

This is a great product with a great application as well. Thanks to the team and the developers for working hard to make this right. This is fantastic!

Smart watering disables my program as it thinks its going to rain, how do I override it - if the weather forecast doesnt pan out or we dont get enuf rain

How is the subsoil moisture determined on the Netro App for each zone?

The app has a number of soil choices- I don’t know which to choose. I assume different soil has different water retention. Is there a list which shows how much water the different soil types require?  Or is there a way to tell which soil you have?

I have a system working in Florida and I just wanted to do the same thing in Kansas and I bought it and I have wired it but I haven't plugged it in because I don't know how I'm going to control each different location and I'm afraid something might go wrong and I won't be able to water in Florida.

So how do I control each separate location with the same phone?

i’ve had the controller installed for almost 2months now and it works fine. I like the idea that it seems to know how much to water and keep the lawn  green. However I have pets who use the backyard and would like the watering to be between 9 pm and 5 am.  I think the system can be setup for manual watering times BUT that defeats getting an expensive smart system to replace a low end rainbird system.  

Is there anyway to set up time constraints on the system and still run on automatic,

Also lack of a manual and good instruction is a pain. 

I have eight zones with smart watering enabled for all zones. I noticed this morning when looking at scheduling that a few of the zones will water multiple times in the same morning. For example, Zone one will water for 4 minutes, Zone 2, Zone 3 excetera. Then it goes back to Zone 1 for 3 minutes, and maybe zone for for 7 minutes. Is this normal?

I have inserted a screen shot.Notice the zone, "house left."