Especias primarias cuales son?

Especias primarias cuales son?

I set up all of my zones for smart watering today and it looks like it will be running all day. On zone 1 it must have watered 5 times (close to an hour total) even after it showed 100% saturation. Do i need to adjust some settings? That is way too much water for 70 degree weather in April. 

Thanks,

Matt

Hi,

The inteligente mode watering a lot of minutes. However I have adjusted the dimensions and type of soil and it seams there is no impact on the schedule. Then I have decided to stop intelligent mode and schedule by myself. However I do not see my schedule in the calendar. I have setup it on preferences but it is not visible. My fear is not active. Thanks

Hello,

I am presently uprgading my jeedom plugin of Netro and I need to test my code with all models. I can do it with Sprite/Spark/Sensor since I have got the devices in my own installation. This is not the case for Pixie, I do not plan to purchase it since I do not need it but some of my plugin users do have it.

Do you have a test/dummy serial number that I could use for testing Pixie integration ?

Thanks

How do I set the Sprite for two users. Setting up user 1 killed the user 2 setup.

Norm

Hello I have 4 pixie devices.  Two are right next to each other.  One of these two keeps going off-line every couple of days.  Then i have to manually press the button on the device to bring it back on-line?  How do i fix this annoying issue?  Thanks. Sang

Hi there - trying to add a manager into the app and I get "Network Error with code: 3405"... I am sitting next to my network and the Netro Device 

Hello, I need help to change the settings from Fahrenheit to Celsius in the app, I have a smart plant sensor.  Thank you

Hola,

Cuando estoy configurando las zonas me pide un valor de area, ¿en qué medida? ¿Metros cuadrados?

Gracias

good evening, I have 4 valves connected under relay and 3 direct, the 3 direct valves work correctly but on the first 4 I always get an E2 error. is it possible to disable the open valve control?

I swapped out a Hunter ProC controller with a Netro Spark 16 zone controller  The zones all work fine, but the pressure is now too low   When I ran a valve test all of the zones were normal but I had an error message for the Master that says “open circuit”   Not sure what it means or how to resolve it   I checked the wiring connections and they seem fine. Has anyone else run into this ? Thanks 

Neil 

Hi 

i have continous problems with 

Sprite / app

Never before

Disconnection to wifi

Even when say : online 

it works randomly ( start/ no start  manual 

irrigation )

Five zones. One not getting smart watering. Ideas on how to correct this? Thanks. 

I have 2 new Pixie faucet timers.  One seems to be working just fine so far.  The other will not shut off the water.  They are both set to Advanced Smart watering but the one never shuts off the water even when it is not on a scheduled watering and it says it is online.  Do I possibly have something set wrong?  Or is it a faulty device?

I have 10 zones set up in my Netro system.  How can I create a program that will "zero out" specific zones while setting up desired minutes on other zones?  Right now, I had to select the minimum "1 minute" for the unwanted zones since "0 minutes" is not an option. 

How do I cancel a schedule watering on the Netro App? I set up a schedule for heavy watering but only wanted to run it 2 days, now I can’t figure out how to cancel the schedule! 

I have purchased Netro Sprite from Amazon. I'm now trying to purchase a couple of Whisperer units. Is there anywhere in the UK as purchasing from the online shop the delivery charge is over $26.

Thanks

Phil

I bought a Netro controller, installed it, and everything works. When I try to integrate it with Alexa, it becomes complicated. I already downloaded the skill and associated my user, but it doesn't appear in Alexa. It only works when testing the skill. Does anyone know how to solve this issue? Thank you.

Good morning,

I already have the Sprite 12 and want to add one or two Pixies. 

Do I need the hub for the pixie or the sprite12 acts as hub?

Thank you!

Sergio