Hi Netro,

One frustration I have is that manual run times are important to me but cannot be longer than 1 hour (or programs) and cannot be adjusted while running.

I have Netro connected to a solenoid that controls watering of our small vineyard.

I rarely water in any way other than manual, because I need to control the amount of watering and also use fertigation to feed the vines.

Due to the amount of water required, I need between two to three hours of watering. I also like to adjust as I go, depending on how long the fertigation takes, so the ability to increase time without stopping the watering is also important.

My other solution is to disconnect the wire from Netro and use a Shelly 1 instead, whereby I can turn the watering on and off as I desire.

I would rather just use the Netro app, given that everything is already connected.

It is quite limiting to not allow hours as well as minutes (or to allow more than 60 minutes). amd not to be able to increase (or decrease) the time while the manual run is going.

My Spark has stopped watering and is showing error 1 short circuit on every solenoid. I have tested each solenoid individually and they all operate disconnected from the spark. After multiple hard resets it started working correctly for a short time now it is saying all the solenoids are open circuit. I have tested all the solenoids and they are working perfectly.

Hi,

Is it possible to upload data from the app so I can keep record on an externat file for more than a month ?

I would like to keep record for a year long. 

Thanks, 

David. 

Buongiorno,

ho appena installato il mio nuovo NETRO, ma non riesco a stoppare l'irrigazione che è partita automaticamente non appena lo ho installato. Potreste aiutarmi?

Dove trovo le istruzioni perla programmazione Dell app in Italiano? 

Hi. The app wont let me add my wundergound id number (IWAGGA24). Can you please help

I've had Netro for 3 years I changed my wifi and I updated it my app. It worked for a couple of weeks and all of a sudden it stopped working. I can't get it to connect to the wifi. It says offline. I can't even do a manual run. Does anyone have any suggestions? 

Hi. Im a new user and everytning seems to be working ss it should but i get the following message when i check the server status

Very happy Sprite user for a year or so - but at this location I have a limitation I need to resolve... and thinking upgrading to Spark - will it resolve the issue ????

So I have installed the Sprite in a rental property - wanting to ensure that the tennents actually look after the garden and look after the place - and one of those things I have done is put in automated sprinklers and drippers to gardens to esnure that the garden gets watered and the grass and plants dont die in the harsh australian climate...

But what I found with a set of tennents is that they did not bother getting or setting up a wifi network. So the sprite had nothing to connect to and hence ran no programs - no connectivity / no watering....

So the Spark has a backup program apparantly.... I assume this means the Spark would have memory and know a schedule of sorts... Of course without connectivity there is no checking on rain schedules etc... Thats fine...  But does it mean if I set up a program to water the lawn for 30 minutes every second day while it had internet connectivity.. If the internet disapears will that mean the program will continue to drive the solonoids at appropriate time and hence carry on watering the garden.

What is the limitation - of cpurse internet features would not be available - is it only manual schedules that would operate - just on time schedules - would it run only for a week or could it run indefinately - or even just a year - until the internet returned...

What is the backup - what is the limitations - how does it work - what are the features !

Similarly how does the faulty valve detection work... Is it just a measure of resistance or what how does this feature work...  If the spark had the capability of measuring water flow (like some controllers do) - then it would be a great feature in measuring the volume of water consumed and of course this would also be an easy way of measuring valve detection... Flow with valve closed = leak somewhere and No flow with valve open = blockage or solonoid issue..... But that is not the feature - so trying to understand functionally and technically what the valve detection is....

Thanks

I have 6 zones but only 4 require to switch on the pump. How can I switch the pump individually on each zone?

I need to run watering programs 2-3 times in a day, every day. I have "two fra m es" checked but it only will do one.  What do I  need to do?

We have an internet outage - Netro knows the smart watering cycle and continues to turn on through the stations at the correct time, however runs intermittently. 5 seconds on, 1 min off. Is there anything I can do to help stay on?

My netro app give me a Notification "Device thirst quencher Low Battery"  

I took the device apart and can see, what looks like, a small battery on the circuit board.  Does this need to be replaced?  And if so, where do I purchase a new one?

Hi I am going to install a sprite controller at a property before wifi is installed. 

Can I set up programs on the controller using hotspot from my phone? So it can then use the irrigation schedule in offline mode until I can connect to wifi. 

Thanks 

I'm getting "Error: Rain delay 1039728 with an end date of 2024-02-27."  I want to extend the delay, but it won't let me.  

What does this WiFi icon mean?

Pixie stopped to connect. Removed battery and found water inside battery housing. All contacts except one of battery are very rusty.

Trying to clean. Water also inside battery / battery box

Is it safe to dry and charge?

How to prevent water from entering the box?

• 

Hello!

Everything is setup to sow our 170m2 of grass this weekend. 

All local gardeners told me to irriigate the planted seeds 5min during the morning and 5min during the night, everyday, however the Netro smart program sets up a weird combination of 10min at 6am then 10 min at 6:40am, and then also for instance 2 days off (each phase, we have 3 for the grass), and this is choosing 'new plant' option.

  Should we leave the Netro smart program or Should we choose our own one???

Thanks!!

The enable button does not stay on. It keeps reverting back to unable. Does anyone know why?

We are in zone 9 in Conroe, Texas and would love knowledge on best length of time to water and how often!  Recommendations please!