更多筛选条件

Runs for 9 hours at a time

Cindy Luvender
更新时间 2019-08-07 00:27:20 UTC 
I have smart watering enabled with a preference for watering times between 1 and 7.  The schedule shows the system is running from 1 - 10 am and then again starting at 6:00 pm - 9:36.  How do I get this adjusted? My water bill was the highest it has ever been!
浏览: 2719   回复: 1

Smart Watering advanced watering times

itsthesun
更新时间 2019-08-06 20:42:23 UTC 

Hey I'm all setup and running with my sprite and things are great!


My issue is that the advanced smart waters is choosing times that are early in the morning when I shower and its reducing the water pressure for me and I'm sure the heads have less pressure coming out since I am using water too. 


Is there anyway without going to basic scheduling and making my own programs that I can edit the times in the morning it waters?

浏览: 2778   回复: 1

Sprite doesn't open valve

Tony D.
更新时间 2019-08-06 20:38:31 UTC 
话题: 安装

I'm doing a first installation with an 100-HV-FF 24V ACRain Bird valve.I connected the wires to the C and 1 connector to serve zone 1. I populated the zone in the app. Because I want to test the system before I disassemble my previous I did not install the valve between the pipes. I click the "play" triangle in app home screen but I get no reaction from the valve. The solenoid is completely closed. I am using the 24V AC/AC adapter bought on your website.

Does the valve need water flowing through to work properly?


Thank you

浏览: 3091   回复: 1

Firmware update for System reboot after power issue

Junglim Huh
更新时间 2019-08-06 11:03:17 UTC 
When are you planning release firmware update for sprite having issue connecting to wifi after power issue? This happens quite a bit and my sprite is off line.
浏览: 2782   回复: 1

changing watering zone times?

Gary Walloch
更新时间 2019-08-06 01:53:14 UTC 
话题: Netro App
I have one zone showing a watering time of 1 minute.  Is there a way to change this.  In the settings it says it waters every 2.65 days for 13.5 minutes.  It may take 30 seconds or more for the zone to come on.  Any ideas
浏览: 2730   回复: 1

Install

Daniel Alman
更新时间 2019-08-05 15:17:08 UTC 
Post install and after first unsuccessful run, it says it watered but it definitely did not, I found an extra wire that I had plugged into ‘C’ next to the ‘M’, that I had left unplugged in my last successful Netro setup. I have now unplugged it and did another unsuccessful run. My question is, when making a wiring tweak like that do I need to press the ‘RST’ before proceeding with a run?
浏览: 2717   回复: 1

sprite losing connection

Robert hays
更新时间 2019-08-04 15:42:10 UTC 
 good install and was working but later lost connection... what firmware version should it have? how about a windows app ? sprite connects to tablet but claims no internet connection....   your sprite is extremely frustrating compared any other smart devices that does't ask to reset router if it loses connection looking for issues. if every device did this i would need a tech full time so i can have a life
浏览: 2725   回复: 1

Can my whisper control 2 zones?

L F
更新时间 2019-08-04 02:09:24 UTC 
话题: 安装
I have two zones for the grass in my backyard and want to connect 1 whisper for both zones since its one small piece of grass.  How can I do this?
浏览: 2764   回复: 1

Promise Made- Promise KEPT!

Kirk Davis
更新时间 2019-08-03 04:32:30 UTC 

The new version is exactly as promised! I can't wait to see how it works!

I have configured my WU PWS, and setup a secondary rain guage as well! 

浏览: 2779   回复: 0

Where's our promised update?

Kirk Davis
更新时间 2019-07-31 11:19:38 UTC 
It's the last day of the month and the new version still hasn't dropped. You are already a month past your original commit date. Please stop marketing products that are add-ons, when the software is lagging substantially. The big companies are going to catch, kill and eat you unless you start running faster. 
浏览: 2854   回复: 1

water amount

Gérard GALBOIS
更新时间 2019-07-31 05:37:55 UTC 
I have installed several Wisper ands would Like to know what rate of water would be acceptable on surface and deep down? 
浏览: 2568   回复: 1

Low pressure in zones

Hussein Diab
更新时间 2019-07-29 16:36:31 UTC 
Hello, I've noticed that 2 out of my 6 zones suffer from low to no water pressure. I tried removing the nozzles to test but the water kept barely coming out. I know the solinoids are working because the water is coming from the zones, but how can I understand why there is super low pressure?
浏览: 2706   回复: 1

Program should be within the same day

OnePlus Venom
更新时间 2019-07-29 03:48:51 UTC 
话题: Netro App

When I try to set a program for tomorrow I get this message "Program should be within the same day"


What does that mean???


Why can't I set programs for an upcoming day???

浏览: 2792   回复: 1

Device sharing between multiple users

Netro Support
更新时间 2019-07-29 03:11:08 UTC 
话题: Netro App
Device sharing between Netro users is supported. A user can authorize multiple users to access his or her Netro products.

To give access to other users, please log in your Netro account, go to Settings->Controller->Manage Users.

Note: Shared users must have a Netro account.


Add or delete users

Device owner can add or delete users through adding or deleting their user name or email account.

Tap “Manage Users” to authorize other users to access the device owner’s Netro products.


Tap “Manage Users” and then you will be directed to the “Users” Page.

Then you can add new manager or new player by tapping the “+” button.



Tap the “+” button and input the user name or user account.

Please input the user name or user account.


Tap “save” and then the user can have access to owner’s shared device.

Users’ information is displayed on “Users” page.



Once users are added, shared users will be shown on “Users” page.


 Access rights of shared users


There are two different types of shared type: Manager and player. Manager and player have different access rights. Manager has more access rights than player. Both manager and player cannot delete controller, change address, delete or add sensor.

Note: Shared users must have a Netro acccount.

Manager’s access rights:

Manager can use all the features of the shared device except deleting controller, changing address, deleting or adding sensor.

Player’s access rights:

a. Read-only: All settings in Controller, Sensors, Program(except run a cycle), Zone list can not be edited.

b. Hide: Preferences, Regulations, Restrictions, zone detail are not shown on Settings page. Regulations events and Restrictions events created by users are not shown on Schedule page.

c. Access to Schedule page: Player can create a one-time Run or Rain Delay on Schedule page.

d. Access to Program:Player can only do “run a cycle now” to programs created by device owners. Player can create a one-time Run or Rain Delay on Schedule page.



浏览: 6446   评论: 4

Hunter sprinklers

Richard Mundy
更新时间 2019-07-28 20:37:35 UTC 
Hello, does Netro work with Hunter sprinklers - having trouble getting them to work!
浏览: 2852   回复: 2

Connection-during Initial Set Up-Sprite Smart atering System

riteshmantravadi@gmail.com
更新时间 2019-07-28 15:22:01 UTC 

During step 8, It says "Netro Connected but no internet"

Can you pleas ehelp?

浏览: 4063   回复: 2

going backward from topic item

gilles z
更新时间 2019-07-28 05:40:18 UTC 
话题: Netro App

When i read an answer on this forum (from the app) 

how can i return back to the previous list  of topics (without doing home button)?

浏览: 2635   回复: 1

wrong translation in French

gilles z
更新时间 2019-07-28 05:37:17 UTC 
话题: Netro App

name is translate with ‘prénom’ (meaning= first name) correct translation is ‘nom’

maybe you can have help from users to have a perfect translation in all languages

浏览: 2623   回复: 1

30 minutes = 10 minutes X 3

Paul Como
更新时间 2019-07-27 11:49:20 UTC 
How do I set my program to run each zone for 30 minutes each, but water 10 minutes 3 times each.  I thought this used to be an option, but I don’t see it.
浏览: 2566   回复: 1

Wrong translation - Italian app

Sergio Bertolino
更新时间 2019-07-27 06:48:11 UTC 
话题: Netro App

Part 2 of my observation of the app content:

Months translation:


The month of May is Maggio 

You translated in Potrebbe which is the translation of the verb Can. 

Best regards. 

Sergio    

浏览: 2648   回复: 1