Hi, I have a Hozelock Micro Irrigation system with multiple Universal Drippers that supply 40 Litre per hour. I would welcome any advice on the best way to set up the app, for a Netro Pixie and this setup. Should Smart Zone be used on basic or auto with user fixed schedules.  Any advice welcomed from experienced Nitro users on the best way to use my new Netro device. Thanks.

Is there a way to see the battery status (devices that use batteries) in the app home screen? It would be of great use when one is leaving the home for a few days, to make sure the device will have enough charge for those days.

My Netro connected to my Wi-Fi but Whisperer will not. It just keeps blinking slowly, white LED. It also won’t connect to my Netro app that is running my watering system. 

Good morning,

I ask you if in the next software update Netro the possibility of enabling and disabling the Master Valve for each zone, I explain, I have connected an Autoclave with a special 24 volt relay to the Master Valve output, there are areas where I have a system  micro-irrigation that does not need an autoclave.  

thank you

Andrea

What's a preferred setting for watering adjustment on the whisperer for just a grass lawn? (I currently have 20% add water 80% stop water) is that too low/high?

i installed the Pixie last Monday, Tuesday it worked fine for the programmed 10 min sprinklers, but this morning it marked as finished but kept on watering. I tried the manual shut off and on and discovered i had to reduce the water pressure for it to work. At full pressure i hear the noise that the valve is trying to close, but it fails. The light goes to green and the water keeps running... 

For now i am adressing it by reducing the water flow, but is this normal? I just have regular city water, nothing special, no special pressure...?

Hi,

I have anabled the smart watering for my netro.

I have 4 zones activated.

My question is why netro water big areas only for 1 or 2 min and the small areas for 5 mins. 

I have done all the settings(sun, shade, soil tile, grass tile, area in sqm). 

Please help. 

Thank you

No issues for a long time (2 years). Ran already today, now will not manually turn on. Reset once and re installed unit once. Is there an outage?

How do I adjust the amount of time when one zone is done and the next zone begins?

Whisperer is showing all data and is controllable on iPad, but not on Android? 

This is needed in the app. The scheduling is harder then it needs to be.

whem my Netro is disconnected from wifi , all stsyem is out of service !!  THIS IS A BIG BUG !  

Is possible set a automatic program when the connection is down ?

Is water backflow integrated into the Pixie timer or does installation require a separate one?

can i get user manual in spanish for netro sprite?

I have 2 whisperers. Both have the nightlight enabled to auto but only one of them turns it on at night the other never does. Any advice?

No funcionan los aspersores 

Indica Network error cose 2507

Dear community

I wondering what is the best moisture level to keep for lawn. The sensor is somewhere around 42%, after watering the garden. Is that enough, should it be more?

Thanks community for your help.

I have two sensors installed for a few days but the humidity still marks 98% why?

Hello, I set the app to run 3 manual programs on the odds day and I have the smart watering system active on all zones.

Will it skip my watering if there is rain in the forecast on an odd day?

Hello,

I'm on vacation and my internet connection has been cut off. I had planned before on netro waterings for the week. Is that without an internet connection in my house, the waterings programmed before will still be done?

Best regards 

Arnaud