My netro is using smart schedule. Even though i have ECO on each zone, zones are watering for more than 20 minutes. it rained last night and today morning it was watering for more than 20 minutes.

 How do i change this?

lot of water being wasted. 

Thanks,

Ananth Bandla

What should my unit light show if it is properly connected?   And where can I find an online owners manual for this product?

Vincent Devlahovich

Hello, yesterday I mounted the control unit with an electrician, the connections are fine, we tried several times the manual function but it did not work, I am trying in various ways to operate the control unit, after several hours I pressed reset and I managed to start the manual program, now it works but I noticed that it does not start if there is a daily program, is it correct??

Instead the programming does not work on the calendar, I tried in various ways but the irrigation does not start, I think the control unit is faulty, I tried several times to program a minute per sector but nothing works. Now it’s raining here of course I disabled the smart zone so for now only the manual function works, not with programming. What advice can you give me?

Thanks

Rosario

Also I would like to point out that yesterday at midnight the irrigation started by itself, without having programmed anything, with the app I could not turn off I had to stattare everything through the electrical panel.
As ever this happens, should be a convenience this control unit controlled by the app instead of problems.

I set up my metro system this morning.  I made an error in programming the watering schedule.  How do I reprogram the Smart watering program?  I have been unable to do it.

I was wondering if there’s a relationship between the weather predicted on the app and the watering frequency. Here it shows daily temperature predicted at 90 degrees when in fact it’s 82 / 83 when 2 watering a week are sufficient. My app wants to water every day and unless I turn it off I don’t see a way to negotiate a more rational and way less costly rhythm. 

I’m in the Orlando area and on Wednesday I just had hurricane Ian drop over 5” of rain on my lawn. Discover tab shows on Wednesday I had less than .3” of rainfall. I’m using the Netro weather station. Is there something I need to change or update?

Good afternoon.

Sometime my controller lost the connection to the router Wi-Fi for some time ( one day or more) and then it riconnettes automatically. I don’t know why.

This morning it lost the connection , but after 10 hours it was still disconnetter. I tried to re connect it manuali, but the controller didn’t find my router. The router is very closed to the controller. When I connect my phone to the WiFi of the controller, i see “no connection”. So. Ok the controller is off line and I can’t connect it. what can I do? I already try to reset the controller turning of the elettrico power. 

My main water line to the sprinkler system came loose and flooded my vacation home yard with 250,000 gallons of water before the leak was discovered and repaired.  Does Netro have the ability to control an electric valve on this feeder line such that the main valve will only open when the irrigation system calls for water?

Raining hard outside for at least 20 minutes but yet, Netro weather n others didn't detect it?

It looks like the sprinklers are not jumping out because of the water pressure is maybe down right after I installed pixie

Even after several hours in full sun my Whisperer looks dead and does not send any signal.

Shirt or long pushes on the button does not change anything.

I suppose that while not that old I have to buy a new one.

Thanks for your advice

All the zone were off in the application but in the device the zone 5 opened the passage of current to the valve remaining opened 

Hello all!

I've just installed the Pixie smart house faucet timer and whenever I try to link the Netro service to my Google Home I get a message saying no devices can be found.

Is there some setting I need to enable to allow the device to be found by Google Home?

If the system lost the connection, it keeps the last schedule?

I am worry about the wstering and I am far away from home.

Thanks

Hello, I’ve often thought it would be nice to have the ability to control my smart watering a little further by say, having a percentage adjustment? I’ve played with the settings and gone from Normal watering to Eco to Frequent but find that the differences are more distinct than I want them. Is there a way or maybe an update coming that will allow me to simply put that I want to water 70, 80 percent, etc? I could much more easily manage my water bill and usage with that handy feature. Please let me know if I’m missing it somewhere! Thanks!!

At the end of the whisperer's learning time, the times are set automatically in the program or have to be done manually?

Hi all!

I have a “Netro Sprinkler WIFI Smart Controller” and when  sometime i have a problem with internet connection provider and  after the connection return up the controller still disconnect until i power-off and power-on the controller.

The led on controller blinking and the app show a off-line message.

 

Why Netro doesn’t automaticaly retry the connection ?

All other ethernet and wifi device automaticaly reconnect  after the connection return up.  It’s possibile configure Netro Controller to retry the wifi connection ot it’s a contoller bugs ?

 

 

Netro App vesion: 3.1.0

Netro controller hw ver.: 1.2

Netro controller firmware ver:  1.1.1

 

Thanks in advance.

Gianluca

 

Hi, my sprite is offline since 14 hours and I did not receive any notification on my smartphone.

Is it correct? How can I enable notifications as soon as the sprite is offline? 

Thank you

Carlo

Hi, anyone knows if the white lights on the hardware could be turned off? Thanks