We have a 9 zone lawn system and a seperate 4 zone garden system. The controllers are 100 yards apart. We hand 2 Netro controllers and a home network that covers the entire area. Can both controllers be operated with one same app? I’ve tried but without success….must be missing something.

Hi. I have two Whisper 2 units which have started to give strange readings, both have full batteries and strong WIFI connection. One unit is showing low moisture content when the soil is very damp and the other is showing 123 lux constantly. Any help would be most appreciated.

Greetings. Your system is currently compatible with Alexa and Google Home but does not integrate with Smartthings at all. I wanted to know if you were planning its integration. Thank you.

Who can help me? I have three Whispers. 2 working properly. 1 who has worked last year only ‘works’ when connected to USB. Loading works fine. Connecting will work. But when placed in the garden it doesn’t work anymore and loses connection and no lights etc. 

What is wrong? WiFi signal is good outside. He is fully loaded? Is the battery broke? He’s only one year old….. one summer season outside. Whole winter stored inside.

Please help me.

Hello!

We just planted a raised bed vegetable garden with a variety of fruits and vegetables (zucchini, yellow squash, cucumber, green beans, strawberries, 2x blueberry bushes) and I bought the Pixie Z1 to use with a soaker hose setup.  

I just setup the pixie and discovered the smart watering options do not include any of these plants.

Does anyone have successful recommendations for settings that would be best for a vegetable garden?

Thanks!

I connected 3 zones and they were working fine last month. All of the sudden all 3 zones stop to work when I manually run the zones. I tested the voltage using multimeter. It seems the device has no voltage output at all when I run the zone.( I am assuming the correct reading should be about 24V). I tried to unplug/plug to restart the device without any luck. What should I do next?

How could I mark those articles or questions that present a special interest for me (something like my "preferred topics")? Some time after reading them, I see it hard to locate in the database. Thank you.

Is there an article explaining the different watering modes of smart watering, more that the one line info on the menu? I am looking at information like levels of humidity pursued, depth of watering, or circumstances under which each mode is recommended.  Thank you

One of my Pixie Z1 is after months of use is having abnormal battery drain where a 100% battery to dead within 3 days. Is this something warranty would cover?

I've replaced 3 sets of AA batteries now within a week or so.

Hello.

I have a wishperer sensor in my garden and the measured values, in my opinion, are not correct in the following hours when the garden is watered. I have seen this same problem on other occasions. Is it possible to check it? Thank you very much.

The figure shows an example (the garden is watered at 6am):

I don't understand the logic behind watering after training. Yesterday and today we had heavy Rain, but the Smart schedule plans to start in 9 hours. In the app I also set to stop watering the day before and after Rain, but that seems to have no effect. Temperatures are low as well, i wouldn't expect watering to start before at least 10 days.

I moved into a house with the Sprite 6 system and have it fully set up on my phone, however can’t get the water to actually run. I haven’t touched anything. Any advice?

I have 3 zones. We have had system running for several weeks early in the morning. Yesterday I checked history & found all 3 zones had instead of a green checkmark icon, an orange wifi with red x icon (see photo below). I was able to try "run now", and only zone 1 worked. 

I ended up deleting ALL schedules & did a one time water on zones 2 & 3 & they worked. I made a new schedule for all 3 zones, and this morning i got the orange wifi icon on zone 1, & zones 2 & 3 ran just fine. 

Any ideas?   TIA!

Hy, i hava a problem.

When i start a irrigation cycle, only one Valve don't open, but when i start a test cycle from App, the same valve correctly open and start for few second the irrigation.

Why in the ccycke test the same valve it's ok and in the manually start don't go?

Idea?

grazie

Hym I have a main pump that start with a wifi switch. Can I call an action from Netro App that start the pump?

For example, whenI start the irrigation cycle, can i call a rest URL?

My lawn and plants are dying! Suddenly something has changed and my unit isn't working. I have tried running manually. Zone will start and suddenly stop. I've checked times and nothing has changed there. I have removed and reinstalled the app. No help! Not sure where to go from here.

There is no LED on my device.  I've power cycled on and off a few times and no change.

Strangely enough it shows connected to wifi but not starting water on a manual test.

Is it dead?

Hello everyone, I have a problem.

To test the system, I started the “manual operation” function. For startup everything is ok but I can’t stop irrigation anymore. I have tried re-configuring the system several time, but I cannot solve the problem. Can anyone help me? 

Thank you

I updated the wifi password in the router. I was able to set up the password in the netro controller but not in the whisperers. I followed the steps provided by the app, pressing 6 times very fast the whisperer button.

But the whisperer wifi did not appear. I tried with 2 of the 5 whisperer I have, but process is not working