I wanted to add a whisper sensor to my existing system.  I accidentally added it as a new device.  I did eventually add the new whisper sensor to my original device.  The issue is I now have two devices in the app.  The first is a device named Sprinkle that has my three whisper sensors attached and a second device named Plant Sensor with nothing attached to it. I want to delete the device  named Plant Sensor.  I cannot find a way to delete it.  

Thanks,

Scott

Ive been trying to remove/disable a zone however the app is not allowing me to do so.  Is there an alternatuve method?

Due to external factors on our property it would be very useful to be able to set the current moisture level for a zone. Is there a way to do this ?

I have a mister setup with multiple Herb racks and raised garden beds. I just got a Pixie and a few Whispers. My hope was using one Pixie and monitoring each bed with a whisper. Is this possible? Can I create multiple zones? Is this something going forward that might be possible? I don't want to set them up as standalones.

I am currently located in New Jersey. I just reseeded my back yard and lawn on Monday. How often should I water them and what times would you recommend 

How do I cancel a watering schedule while we make sprinkler repairs?

Zones 12 Serial number E4956E4B65BD Hardware version 1.2 Firmware version 1.1.3 Last active 2021/04/05 20:11

Doesn't respect watering hours in smart mode.

The time of the zones has only been changed and it cannot be reset and it is watering every 5 minutes.

How can I reset any zone

After 4 months of non use over winter, I cannot restart my Netro system 

1 sec  blinking of light and have pressed reset button but still get  message “off line” and blinking persists.  

I have a good WiFi signal. 

Basically, is the Pixie water control valve one way, or can it shut off/turn on with pressure from either side?  In order to install it so the button faces up, I need to install it so the water comes in what is labeled as the "Outlet" side.  I don't know if it's labeled "Outlet" because it is a male connection, or because it cares about the direction of the water.  Otherwise, I will need to buy a male/male and female/female adapter, flip it "upside down" and use it with the button facing down.

Thanks.

Hello everyone ,

During the last hour or so my netro spark has been doing these inexplicable Manual runs. They start and stop on their own without any manual input . Any ideas ?

Yard has been fertilized and need to water now as next scheduled is Sunday.

Why is my light flashing on my Netro?

Hi,

my firmware version is the 1.1.1

Please, can I have the last firmware vesion and the instructions for update my controller.

The serial number is E4956E4B6B05

Thank you

Hello - just a question about icons / symbols on the schedule.

Guessing the green tick means ‘success’, but what do the warning symbol, and the phone screen symbol mean?

Oggi è tutto il giorno che mi dice Offline... La connessione internet funziona correttamente... C'è qualche problema nel server? 

I have checked in the smart schedule that tomorrow is programmed to run zones that should be skipped.

I have set up the whisperer to skip run if moisture is above 40%. Current moisture is:

• Zone 2 - 92%
• Zone 5 - 70%

I notice in the App, that there is a field called SQ  Feet. It's this info needed if im setting everything.

Hi,

I am seeing 20%+ increases in soil moisture when there is no rain and I am not watering and also 20%+ reductions in moisture directly after watering which seems counterintuitive. Is this normal? Can anyone explain what is going on to me? Thank you!

Mike

What is an ideal soil moisture level? My new Netro Whisper is measuring 83% down from 88% 3 hours ago. Is this too moist? It is average raised bed plant soil. I have googled and found some sites saying no more than 45% and some sites say no less than 70% so I am very confused!