I have smart watering enabled with a preference for watering times between 1 and 7.  The schedule shows the system is running from 1 - 10 am and then again starting at 6:00 pm - 9:36.  How do I get this adjusted? My water bill was the highest it has ever been!

Hey I'm all setup and running with my sprite and things are great!

My issue is that the advanced smart waters is choosing times that are early in the morning when I shower and its reducing the water pressure for me and I'm sure the heads have less pressure coming out since I am using water too. 

Is there anyway without going to basic scheduling and making my own programs that I can edit the times in the morning it waters?

I have installed several Wisper ands would Like to know what rate of water would be acceptable on surface and deep down? 

How do I set my program to run each zone for 30 minutes each, but water 10 minutes 3 times each.  I thought this used to be an option, but I don’t see it.

I have set up all the zones with the whisperers. And there is something I do not understand.

One of the zones usually get flooded in autumn because the type of soil retains lots of water. 

But the whisperer and the smart zone is saying that the zone has to be watered more time than the other zones. 

My question is if the whisperer adapts the irrigation schedules and the time is watering per zone. Depending on the moisture, weather conditions  and type os soil.  It is clear that the soil type determines how much and how often to water. 

Here in the following link (https://www.netrohome.com/shop/products/whisperer)says that "Netro accurately measures the water capacity and drainage rate of your soil, making sure your soil always receives the perfect amount of water at the perfect time."

That is fine, but it is confusing that in the app I can still define the type of soil.

A second question I have is that I can define the watering strategy (Regular, ECO etc...) I want to know if the whisperer and the controller will notify me if I have to change the strategy based on the weather conditions and the type of soil, plants etc...

Any idea?

This isn’t AI!

Hi!

For testing reasons I "watered" one of my zones manually, which increased the moisture level (but I did not water this zone actually). How can I reset the moisture level of one or all zones to get a proper calculation again and to have all my zones (that are absolutely identically configured) showing the same level and getting the same scheduled watering?

Thanks!

Have you already schedule to connect METEO.it and THE WEATHER CHANNEL ? The available providers are not so fine tuned with ITALIAN forecast data system. Please see attached screenshot of the three different forecast provided today from your three providers :

I understand feature for setting rain delay, but would find it useful to adjust smart scheduling to say there was NO rain on a day it was forcasted. We have had >90 degreeF days and today smart schedule had rain as forcast, but we only had a trace - meaning the lawn needs irrigation but Smart is preventing/delaying it. I know I could increase the amount of rain threshold,  but it will still not correct for when that amount of rain has occured in the area - just not here.

Scheduled a one time run for a certain time in Settings->Program, but the app didn’t show the run in the schedule and the irrigation did not run either. Any idea how to set up a one time run when smart feature is enabled? Thanks 

Hi... I've set my Netro Sprite's watering "time frame" (under Settings) to be between 7 and 11pm. It still however schedules its watering start time at 6pm.  How can I fix this?

Thanks

I have set start/end water time in preference, but it is watering outside the assigned time. Anyone else experience that, and how can I fix this?

My lawn is not getting enough water. I have the watering set to boost and still not enough. Any other settings available other than manually triggering zones?

Hey- just added the whisperer sensors to the system - one sensor by the bamboo always shows zero lux sunlight, it is mostly in shade, but definitely gets light, is it strange that sensor shows zero lux? 

Hey- just added the whisperer sensors to the system - one sensor by the bamboo always shows zero lux sunlight, it is mostly in shade, but definitely gets light, is it strange that sensor shows zero lux? 

Netro's Rain Delay Feature

To add a rain delay, users can go to the Schedule page, press the + sign on the right upper corner and select Rain Delay.
           

If you want to review the created rain delays, you can go Settings->Restrictions and your the rain delays will be shown. You can edit and delete the existing rain delays too.

Good Day,

Really enjoying the product and app so far. 

 Another question: I noticed my Smart Water schedule includes a couple zones that did not end up running at the scheduled time (see attached screenshot). Is this due to the dynamic changes in the algorithm? The home page did show, however, that these zones ran but they actually did not. 

Thanks. 

The smart schedule has now watered twice after heavy rains this spring/summer. Any thoughts on what might be going on?

Hi, I installed a sprite a couple of months ago and I'm a big fan. Any plans to develop a fertilizer/insecticide injector or can make recommendations for one?

My smart schedule seems to be working very well and is adapting to weather, etc.  However on days where it waters it seems to be doing everything twice.  For example many days it runs through all my zones and then immediately runs through them all again, each zone the same amount of time as the first time through.  Is this a glitch?  Seems like 9-14 minutes two times over the course of a few hours is a lot to me.