Más filtros

Whisper Gen 2 update firmware

Phil Middleton
Actualizado 2025-05-16 14:28:46 UTC 
I have 3 Whisper gen 2 sensors 2 have firmware 3.1.1 and one has firmware 3.1.5. How do I update the firmware on these devices?
Ver: 1215   Respuesta: 1

Spark- How many Whisper Gen 2 devices?

Kirk Davis
Actualizado 2025-05-16 12:40:39 UTC 
Tema: General
I would like to add a GEN 2 whisper to my Spark system because I cannot seem to rely on any of my three weather stations to provide accurate rainfall. I obviously don’t want to rely on a single sensor to determine the moisture level in my entire lawn, so can I add multiple to a zone and have Netro average it per zone? 
Ver: 1173   Respuesta: 1

Add more sensor to my Pixie white

Paolo S
Actualizado 2025-05-15 20:41:08 UTC 
How can I do?
Ver: 1240   Respuesta: 1

How does programs and smart watering coexist

Panda88
Actualizado 2025-05-15 18:20:45 UTC 

Hi 

I have some basic programs to water.  At the same time smartwater is enabled on zones?  

It seems the programs run - but smart water does not control the duration 

Is there a way to specify when watering evens should start but let the smart water control duration?


Ver: 1202   Respuesta: 1

Kata Cserni
Actualizado 2025-05-13 15:32:11 UTC 
  1. How can I set an irrigation schedule without WiFi? I have a rental house that is not occupied ( no Internet service) , but I would like to create an irrigation schedule. I app allows me to connect for test run, but not to set new schedule. 
Ver: 1241   Respuesta: 1

Will not connect

Rick VanHooser
Actualizado 2025-05-10 16:15:01 UTC 
Having problems getting it to connect to wifi?  Trying everything I can think of? Help???
Ver: 1290   Respuesta: 2

Whisperer 2 temperature?

Brett Rabe
Actualizado 2025-05-09 19:07:46 UTC 

My whisperer-2, installed ~36 hours ago, is consistently reporting a temp about 10F hotter than reality.


Thoughts?

Ver: 1269   Respuesta: 1

Protecting whisperer from dog

Carolyn Seyfried
Actualizado 2025-05-09 17:54:44 UTC 
Tema: General
Does anyone have ideas for protecting whisperer from my gsd puppy?
Ver: 1140   Respuesta: 0

Zones not turning on

Neil ONeill
Actualizado 2025-05-09 12:41:28 UTC 
Any reason why the system sometimes skip zones and not water them. I have 3 sensors and they all reading the same moisture across all 9 zones, that’s why I’m confuse into why sometimes decide to skip zones. 
Ver: 1229   Respuesta: 1

One zone comes regardless of the schedule whenever any other zone is on.

Gary Walloch
Actualizado 2025-05-09 12:29:14 UTC 
My #1 zone comes on whenever any other zone is on.  There has been no changes since last season other than a new wifi gateway.  I have deleted the Netro app and still have the same problems.  I have checked wiring to the controller and it is exactly the same as last season.  No shorting.  Does anyone have another suggestion to try and solve this issue?
Ver: 1291   Respuesta: 3

Can you water a zone longer than 60 minutes?

dillonhueser
Actualizado 2025-05-07 19:04:41 UTC 
I am limited in GPM, and in some areas of my lawn, I would like to water for more than 1 hour at a time for deep soaking. I cannot find a way without using multiple programs to the same zone. It is pretty labor intensive.
Ver: 1216   Respuesta: 1

Light out on the Netro Base unit

Scott Flanigan
Actualizado 2025-05-04 20:09:46 UTC 
Is there a way to replace the light?
Ver: 1227   Respuesta: 1

Watering notifications in Android app

Kai Nicholson
Actualizado 2025-05-04 14:12:08 UTC 

I have the Netro Whisperer2, and all works fine except for smart watering notifications.

They alert within the Netro app - how can I get them to alert outside of the app (i.e. "normal" smartphone alerts)?


It's great that I get the notification in the app, but that means that I have to constantly manually open the app to check for notifications - which essentially makes the notifications almost useless.


I've uninstalled and re-installed; I've disable the system setting to give the app access to send system notifications and then re-enabled it; and anything else I could think of that could be stopping the app being able to send a system notification.

Am I doing something wrong here, or does this intentionally only keep the notification internal to the app?

Ver: 1324   Respuesta: 1

How to create a 2nd user

bdelariva
Actualizado 2025-05-04 13:16:18 UTC 
How do I add a second user ( second phone) to our system?
Ver: 1216   Respuesta: 1

Pixie Offline

mprtjd
Actualizado 2025-05-03 15:33:15 UTC 
I received a notification on my phone that my Pixie is offline. I am out of state. Will my pixie still execute its schedule? Will it water my plants?
Ver: 1245   Respuesta: 1

Batteria pixie

Max64
Actualizado 2025-05-02 08:32:19 UTC 

La batteria non funziona più  è possibile averne una di ricambio? Grazie


Ver: 1210   Respuesta: 1

Soil and weather

Stephen Brewer
Actualizado 2025-04-29 10:06:27 UTC 
Tema: General

Hi I live in the uk and have chalk under a few inch’s of soil what setting on soil types is it most close to with you soil types and what the best weather options you have for uk weather

Regards

Steve

Ver: 1226   Respuesta: 1

IFTTT Trigger for moisture

Kareo
Actualizado 2025-04-29 04:50:52 UTC 

When I try to set the trigger for a moisture level in IFTTT, it does not give me the option to choose at what moisture % I want the trigger to run.  How do I set the trigger for a specific %?


It only gives me the option for account, device, and zone.

Ver: 1283   Respuesta: 2

does not irrigate

Giovanni Asoni
Actualizado 2025-04-28 15:58:30 UTC 
The same thing happens to me too. No irrigation today... 04/27/2025 Netro does not connect... it says it is watering in manual mode, then I go to check and nothing happens! No water comes out of any station, I tried to reset but to no avail. If I try the tester the irrigation starts but if I try with the manual it says it is watering but that is not true. I checked the Wi-Fi and it is fine.
Ver: 1290   Respuesta: 1

Irrigation system service

Rick Joseph
Actualizado 2025-04-27 19:53:45 UTC 
How do you allow your irrigation or landscape service people to run the system without having a phone or Internet connection? Is there a simple way for them to override the sprite, and use some other way to manually open the valves without going underground to expose them?
Ver: 1192   Respuesta: 0