My whisperer sensor stopped working after a few weeks. Any ideas?

Is there a way to assign one sensor to multiple zones?

I think Rachio adjusts the watering schedule with sunrise to have all zones completed as the sun is coming up. Is this something you intend to add? I think this will come in handy with the heat of summer.

If I have a zone set to Smart Watering - Basic with a schedule to come on for 30 minutes, will the smart watering adjust the duration of the watering based on the weather (say 10 minutes when it’s cool, the full 30 minutes when it is hot), or just turn it off/on based on the 5mm expected rain threshold?

Barry

The setting for windy conditions is great.

However the zones that includes drip irrigation doesn’t get impacted by winds (since they’re often under dirt/mulch etc) usually rotors and nozzles would be impacted . Is there a way not to include in ground drip irrigation on windy conditions?

How often is the smart watering schedule updated? This morning it was raining quite a bit, but so far my watering schedule indicates a watering session for tomorrow. Not only does this waste water, but it violates one of my restrictions, namely, no watering the day after a rain. 

Notice of obsoleting Weather Underground

Netro has changed the weather source Weather Underground to Dark Sky from the server side for users of Weather Underground. The reason is Weather Underground stopped its API service without any notice. The whole community is looking for solutions. So we have internally disabled the Weather Underground option and used the data from Dark Sky.

We are sorry about the inconvenience. Please contact us if you have any questions.

Regards,

Netro

I own a very small lot and would be interested only in setting up my own programs. How can I override the system's smart watering schedule? I installed a new Netro Sprite today and right off the bat it shows a lot of watering on the first day. Thank you.

Have two Whiperer sensors in container pots setting up for bare root treesin large fabric bag containers. Sensors have detected a moisture level of only up to 16%. This morning after and during a one inch rain the soil moisture is only reading 3% and 6%. Clearly something is wrong. 

Live in Hawaii and yesterday we had flood level rains and to my disappointment Netro watered this morning even though I have it set to skip if it rained the previous day. Anyone have this happen?

Customization->set rain/temperature/wind threshold to skip watering

Netro automatically creates dynamic watering schedules according to local weather, so if you turn on the smart zone feature for your zone, season adjustment will be made with smart watering schedules according to weather.

There are different types of weather restrictions: rain, temperature and wind.

By default, If you turn on the smart zone feature, Netro will skip the schedules (including manual schedules from user programs) when there is a chance of significant rain(>0.2inch).

The default threshold to skip watering when temperature is too low is 0 Celsius degree (32 Fahrenheit) for all the Netro controllers.

You can now customize rain, temperature and wind threshold through Settings->Preferences.

Here in ocean city NJ, when we seed for new grass we need the water to come on twice daily to start germination. When I set my Netro to “new plant” and the soil type to “sandy clay” which is the top layer, the controller had only been watering every 2.21 days. The soil is dust dry. I don’t want to have to make gross adjustments. That is why I bought Netro. What’s wrong?

It would be great to have a feature that runs the sprinklers three times a day for 7 days when I put down new grass seed. I can build a program for this and it does not take very long. It would be a nice feature to have this built into the app. 

Does netro have a program for new grass seed?  I'm going to oversees later this month and was wondering how to set my sprinklers to get the seed to grow.

Can’t figure out how to have the weather app stop the sprinklers

It would be nice if more California native style plants (dry climate) were included in the database - or at least that sort of watering style (much less frequent/deep) be available as an option.  I find that when relying on the smart watering with generic salvia hybrid selected for plant type, the water usage is actually higher than the manual program i had set before, especially now in summer months I feel it might be overcompensating.  I'd like to be able to rely on the "smart" aspects, but not sure it makes sense given the higher water usage so for now will probably be forced to go back to manual programming instead.. If anyone has some experience/suggestions on matching these types of plants up with what is in the database I'm all ears as well.  Thanks!

Hello, 

Wonder why the soil moisture doesn't change to 100% after a big rain in my area?  The soil moisture percentage is important since this might trigger the auto watering (water will kick in when the max moisture setting is greater than the actual moisture  percentage)

Thanks 

I have 4 zones. Two of these cover the same piece of ground. One zone has pgm sprayers and the other zone has regular sprayers .But they cover exactly the same area. How do I tell the app this so that it knows that running the sprinklers for one zone waters the same trees and grass as the other zone? 

To try and clarify the question - these zones cover the same physical piece of ground, (they overlap 100%) but netro doesn't know that, so it will water one zone and think the other zone is still in need of watering - and thus water the same grass twice. (each zone once so the same grass twice).  Netro's algorithm for determining soil moisture levels can't work if it doesn't realize these two zones are the same physical piece of grass. 

In the zone settings, the app offers different types of watering, for example, regular, deep watering, boost, etc. One is labeled EPA. 

What are the differences between the settings and watering times/amounts for: regular, boost, and EPA?

Hello - I have a 9 zone system. I have set all of the zones with the exact same settings for type, grass, etc. I do not have any sensors. 

However, the app shows the zones having different moisture levels, and waters certain zones differently than others, even though the settings and system location are the exact same. 

Can you help me understand why the system would treat these identically programmed zones differently

Thanks!